100% Pure Polyurea Waterproofing Polyurea Coatings

• CAS No.: 9003-11-6
• Color: Black
• Appearance: Liquid
• Model NO.: polyurea
• Main Raw Material: Polyurethane
• Method: Spray
• Level: Finish Coat
• Drying Method: Air Drying
• Certification: ISO9001
• Substrate: Ceramic
• Components: Film Forming Matter
• Formation Mechanism: Conversion Type
• Solid Content (%)≥: 100
• Gelation Time (S)≤: 45
• Surface Dry Time (S)≤: 120
• Tensile Strength (MPa)≥: 22
• Elongation at Break (%)≥: 450
• Tearing Strength (N/mm) 2: 50
• Low Temperature Flexibility (°c)≤: -40
• Impermeability (0.4MPa, 2h): Impermeable
• Transport Package: Pallet
• Specification: Polyurea
• Trademark: CNMC
• Origin: China

Product Description

Product Description

Product Characteristics

Mechanized construction can avoid manual operation and reduce the quality risk. The coating film can bear weight in 30 minutes, which can relieve the influence of

engineering cross construction.

Not sag in vertical face and hook face. The coating film is seamless.

The coating film is compact, which can prevent infiltration of corrosive medium. No VOC and heavy metal, environment friendly.

All the performance indexes of the coating film are reach to the International standard.

Technical Parameters

 

	Items			Targeted value	Inspection standard
Appearance				The color is consistent.	Visual inspection
				No defect.
Drying time	Surface drying time  s		≤	81	GB/T 23446-2009
	Hard drying time min		≤	8
Tensile strength		MPa	≥	19.8	GB/T 23446-2009
Elongation		%	≥	486	GB/T 23446-2009
Tearing strength		N/mm	≥	64.9	GB/T 23446-2009
Bonding strength		MPa	≥	2.5	GB/T 23446-2009
Hardness(Shore A hardness)			≥	92	GB/T 23446-2009
Oging test(heating)				Flawless, distortionless	GB/T 23446-2009
Oging test(artificial climate)				Flawless, distortionless	GB/T 23446-2009

Range of application

Old roofing waterproof renovation engineering.

Waterproof and insulation integration engineering like factory and hotel.

Surface waterproof and anti-corrosion engineering like metal construction, steel structure and color plate.

Large span roofing waterproof and anti-corrosion engineering like museum, library and factory. Waterproof anti-seepage engineering like stadium stand, sewer and underground space building.


Shandong  hightop Machinery(Material) Co., Ltd. Hotline:[phone]

1

 

Anticorrosive anti-seepage engineering like artificial lake, artificial river, landfill, sewage pool and landscape pool.

Surface treatment before

Steel

Sand blasting is not lower than sa2.5 level. Manual derusting reach st3 level. No oil, water and soluble salts on the surface. Primer painting should be painted in 4 hours after derusting.

Old ground covered with paint

Completely remove the old paint coating which is loose and incompatible. Use sand-blasting machine or shot blasting machine to roughening the surface. Dust removal and cleaning.

Grease-stained surface

Clean and polish thoroughly. Greasy dirt will influence adhesion of the product.

Concrete

When the concrete curing period expires, base dealing can be started to if the moisture content less than 6%. Smoothing processing should be needed if surface flatness is substandard.

Seal primer

Spray or roll for special sealing primer 1 to 2 times. Repainting time is not less than 4 hours.

Mid-level repair paint

Repair holes and pinholes to avoid pinholes and bubble during spraying.

Surface coating

Use special spraying equipment for polyurea to spray. Thickness of the coating is 1 to 2 mm in each spraying. Material consumption is amount of 1.2 to 2.5 kg/m2. Repainting time is no more than 4 hours.

Execution conditions

Environment temperature range: 5 to 35ºC. The base surface temperature should be higher than the air dew point temperature at least 5ºC. Environment humidity rage: 30 to 80% Atmospheric conditions: Insure that construction site should be dust-free and without strong winds.

Notice: This product should not be used on the site with strong sunlight or strong ultraviolet.

Construction Method

 

		Spraying	Use special spraying equipment
		Construction Parameters
	Mixing ratio (weight		HT-7109A (Curing agent): HT-7109B(Colored
	ratio)		paint)=1.1:1 Use special spraying equipment to mix and
	Material temperature		50 to 80ºC
	when spraying
	Diluent		Not allow to use
		Shandong  hightop Machinery(Material) Co., Ltd. Hotline:[phone]		Hotline:[phone]
				2

Notice: For reference only, drying time is measured in standard conditions(25ºC, humidity is 60%). In different temperature and humidity, drying rate has different degrees of change. Drying rate also be affected by film thickness, ventilation conditions, type of lower coating and so on.

Packing

HT-7109A in iron drums packaging: 22kg or 220kg;

HT-7109B in iron drums with three outlets packing: 21kg or 210kg


Expiration date

Under the condition of storage, Expiration date of the product in original packaging status is 12 months since the production.


Storage and Transportation

The product should be stored sealed in a cool, dry, well-ventilated area and avoid heat and fire. The environment of the boxcar should be dry, sealing when transporting. The product should be kept stable in the boxcar.


Health and Safety

Please read the instructions and warning signs on the container before use.

The product must be used in well-ventilated conditions. No fire, such as welding, polishing, smoking and other unstated conditions in the construction site. The product does not contain organic solvents, but it still has certain toxicity. Wear a gas mask and other protective gear during construction. Do not inhale paint fog and avoid skin contact paint. If the paint splashed on the skin, rinse with proper cleaning agent, soap and plenty of water. If it gets into your eyes, you should flush with water and find medical treatment immediately. Dry coating is non-toxic in normal construction conditions.


Statement

The information provided in this product specification is based solely on the knowledge we have acquired in the lab and in practice. But because of the limitations of our knowledge and the use of products is usually out of our control, we only give the warranty of the quality of the product itself. We reserve the right to modify the instruction without prior notice. Please contact Shandong  hightop Machinery(Material) Co., Ltd. for the latest version of this manual. Technical instructions and safety instructions for products, please contact with the office of Hightop or technical services division of Hightop and check out the company's website for support.
 

 

Packaging & Shipping

Contact Us